What is the role of mask in CPAP?

CPAP and bilevel devices are intended to be used with special masks (or connectors) which have vent holes to allow continuous flow of air out of the mask. When the device is turned on and functioning properly, new air from the device flushes the exhaled air out through the mask vent holes.

Is Resmed P10 pillow mask compatible with all PAP machines?

The AirFit P10 is ideal for positive airway pressure (PAP) device such as a continuous positive airway pressure (CPAP) or bilevel device. Note that, this mask is not compatible for use with ResMed AutoSet CSâ„¢ 2 and VPAPâ„¢ Adapt SV devices.

What is special about Airfit P10 pillow mask?

Resmed P10 mask has QuickFitâ„¢ elastic headgear with unique split-strap design that provides stability and adjustability with minimal facial contact.

Is AirFit P10 suitbale for children?

The AirFit P10 is designed to be used by patients (> 66 lb (30 kg)) for whom positive airway pressure therapy has been prescribed.

Is Resmed pillow mask made of PVP?

No. Resmed AirFit P10 mask does not contain PVC, DEHP or phthalates, also is not made with natural rubber latex.

How to clean AirFit P10 pillow mask?

Always follow cleaning instructions provided in the manual. Some cleaning products may damage the mask, its parts and their function, or leave harmful residual vapours that could be inhaled if not rinsed thoroughly. Soak the headgear in warm water with a mild liquid detergent, hand wash the headgear with a soft bristle brush. Then, thoroughly rinse the headgear under running water and eave the headgear to air dry out of direct sunlight.

Resmed AirFit P10 CPAP Pillow Mask

ResMed

₹5,865₹6,90015% off

Doctor-CuratedExpert selected

Verified ProductQuality checked

Reliable DeliveryPAN India

Secure CheckoutSafe payments

Free DeliveryOn all Orders

2 Days Returnable2-day policy

Doctor-CuratedExpert selected

Verified ProductQuality checked

Reliable DeliveryPAN India

Secure CheckoutSafe payments

Free DeliveryOn all Orders

2 Days Returnable2-day policy

Doctor-CuratedExpert selected

Verified ProductQuality checked

Reliable DeliveryPAN India

Secure CheckoutSafe payments

Free DeliveryOn all Orders

2 Days Returnable2-day policy

Doctor-CuratedExpert selected

Verified ProductQuality checked

Reliable DeliveryPAN India

Secure CheckoutSafe payments

Free DeliveryOn all Orders

2 Days Returnable2-day policy

Doctor-CuratedExpert selected

Verified ProductQuality checked

Reliable DeliveryPAN India

Secure CheckoutSafe payments

Free DeliveryOn all Orders

2 Days Returnable2-day policy

Doctor-CuratedExpert selected

Verified ProductQuality checked

Reliable DeliveryPAN India

Secure CheckoutSafe payments

Free DeliveryOn all Orders

2 Days Returnable2-day policy

We accept:

Helps with

Sleep Apnea COPD Chronic Obstructive Pulmonary Disorder

AirFit N20 is incredibly small and lightweight.
Popular nasal mask to be used with CPAP.
Only three pieces makes assembly, fitting easy.
Suitable for people who wear glasses.
Does not move around when you switch sleep positions

AirFit P10 pillow mask is specifically designed with QuietAirâ„¢ woven-mesh vent technology which makes this the quietest mask yet, promoting patient acceptance, offering the comfort of a better nightâ€™s sleep.

DreamStation Auto Machine
Hose
Dark Blue Reusable Filter (Installed)
Light Blue Disposable Filter (Uninstalled)
80W Power Supply
Power Cord
User Manual
Carry Bag

Should be used only under the supervision of a medicinal practitioner.
Hold the pillows at your nose, ensuring that the pillow size indicator is on the bottom and you can see the left (L) and right (R) orientation indicators.
Stretch the lower strap around the back of your head. The top strap should sit comfortably on top of your head.
Pull the headgear over your head by holding the lower strap.
Move the mask away from your face, and then place it back again. Ensure the nasal pillows fit securely into your nostrils with both pillows positioned upright.
Finally, connect the end of the maskâ€™s tube into your deviceâ€™s air tubing.
If adjustment is needed, simply spread the upper and lower straps apart to loosen, or draw them closer together to tighten. Turn on your device as instructed by your doctor.

If any visible deterioration of a system component is apparent (cracking, crazing, tears etc), the component should be discarded and replaced.
Avoid connecting flexible PVC products directly to any part of the mask that may cause the components to crack or break.
Do not over-tighten the headgear when fitting the mask as this may lead to skin redness or sores around the mask cushion.
Do not iron the headgear as the material is heat sensitive and will be damaged.
Disassemble the pillows from the frame according to the disassembly instructions.
Thoroughly clean the separated mask components (excluding headgear), by gently rubbing in warm (approximately 86Â°F/30Â°C) water using mild soap.
Use a soft bristle brush to clean the vent.
Inspect each component and, if required, repeat washing until visually clean.
Rinse all components well with drinking quality water and allow to air dry out of direct sunlight.
When all components including the vent are dry, reassemble according to the reassembly instructions.

Frequently Asked Questions

CPAP and bilevel devices are intended to be used with special masks (or connectors) which have vent holes to allow continuous flow of air out of the mask. When the device is turned on and functioning properly, new air from the device flushes the exhaled air out through the mask vent holes.
The AirFit P10 is ideal for positive airway pressure (PAP) device such as a continuous positive airway pressure (CPAP) or bilevel device. Note that, this mask is not compatible for use with ResMed AutoSet CSâ„¢ 2 and VPAPâ„¢ Adapt SV devices.
Resmed P10 mask has QuickFitâ„¢ elastic headgear with unique split-strap design that provides stability and adjustability with minimal facial contact.
The AirFit P10 is designed to be used by patients (> 66 lb (30 kg)) for whom positive airway pressure therapy has been prescribed.
No. Resmed AirFit P10 mask does not contain PVC, DEHP or phthalates, also is not made with natural rubber latex.
Always follow cleaning instructions provided in the manual. Some cleaning products may damage the mask, its parts and their function, or leave harmful residual vapours that could be inhaled if not rinsed thoroughly. Soak the headgear in warm water with a mild liquid detergent, hand wash the headgear with a soft bristle brush. Then, thoroughly rinse the headgear under running water and eave the headgear to air dry out of direct sunlight.