Resmed AirFit P10 CPAP Pillow Mask
Brand: Visit ResMed Store
Estimated delivery: 6-9 business days
Product Highlights
- AirFit N20 is incredibly small and lightweight.
- Popular nasal mask to be used with CPAP.
- Only three pieces makes assembly, fitting easy.
- Suitable for people who wear glasses.
- Doesn’t move around when you switch sleep positions
Additional offers
Get an Additional 1% off on this order if you Prepay it. Applicable on a min cart value of ₹599. Get cashback up to Rs. 300 on payments via Mobikwik Wallet. For Celergen capsules and serum, please contact Cureka Support directly to place the orders. Contact Cureka support at care@cureka.com or WhatsApp at +919655928004.COD available from ₹599 till ₹9999
MRP: Offer: 5,796.00You Save: 1,104.00 Inclusive of all taxes
- Description
- Additional information
Description
- The AirFit P10 pillow mask is designed with New QuickFit™ headgear clip and offers easy adjustability.
- Dual-wall technology with trampoline action seals on contact, dispersing air gently to the nose.
- Key-clip nasal pillows offer effortless assembly, with color coding for easy sizing and left/right orientation to ensure that the mask fit properly.
- Innovative flexible tube is ultra light and flexible yet highly durable, offering patients full freedom of movement without compromising seal.
- QuietAir woven-mesh venting quietly directs exhaled air, so it’s barely noticeable to patients and their bed partners.
Direction of use
- Should be used only under the supervision of a medicinal practitioner.
- Hold the pillows at your nose, ensuring that the pillow size indicator is on the bottom and you can see the left (L) and right (R) orientation indicators.
- Stretch the lower strap around the back of your head. The top strap should sit comfortably on top of your head.
- Pull the headgear over your head by holding the lower strap.
- Move the mask away from your face, and then place it back again. Ensure the nasal pillows fit securely into your nostrils with both pillows positioned upright.
- Finally, connect the end of the mask’s tube into your device’s air tubing.
- If adjustment is needed, simply spread the upper and lower straps apart to loosen, or draw them closer together to tighten. Turn on your device as instructed by your doctor.
Safety information
- If any visible deterioration of a system component is apparent (cracking, crazing, tears etc), the component should be discarded and replaced.
- Avoid connecting flexible PVC products directly to any part of the mask that may cause the components to crack or break.
- Do not over-tighten the headgear when fitting the mask as this may lead to skin redness or sores around the mask cushion.
- Do not iron the headgear as the material is heat sensitive and will be damaged.
- Disassemble the pillows from the frame according to the disassembly instructions.
- Thoroughly clean the separated mask components (excluding headgear), by gently rubbing in warm (approximately 86°F/30°C) water using mild soap.
- Use a soft bristle brush to clean the vent.
- Inspect each component and, if required, repeat washing until visually clean.
- Rinse all components well with drinking quality water and allow to air dry out of direct sunlight.
- When all components including the vent are dry, reassemble according to the reassembly instructions.
FAQs
Resmed P10 mask has QuickFit™ elastic headgear with unique split-strap design that provides stability and adjustability with minimal facial contact.
The AirFit P10 is designed to be used by patients (> 66 lb (30 kg)) for whom positive airway pressure therapy has been prescribed.
The AirFit P10 is ideal for positive airway pressure (PAP) device such as a continuous positive airway pressure (CPAP) or bilevel device. Note that, this mask is not compatible for use with ResMed AutoSet CS™ 2 and VPAP™ Adapt SV devices.
Always follow cleaning instructions provided in the manual. Some cleaning products may damage the mask, its parts and their function, or leave harmful residual vapours that could be inhaled if not rinsed thoroughly. Soak the headgear in warm water with a mild liquid detergent, hand wash the headgear with a soft bristle brush. Then, thoroughly rinse the headgear under running water and eave the headgear to air dry out of direct sunlight.
No. Resmed AirFit P10 mask does not contain PVC, DEHP or phthalates, also is not made with natural rubber latex.
CPAP and bilevel devices are intended to be used with special masks (or connectors) which have vent holes to allow continuous flow of air out of the mask. When the device is turned on and functioning properly, new air from the device flushes the exhaled air out through the mask vent holes.
Additional information
| Weight | 0.5 kg |
|---|---|
| Dimensions | 3 × 59 × 59 cm |
| Manufacturer Details | Resmed India Private LimitedFirst Floor Hospitality District Worldmark 1 Coworks Aerocity Indira Gandhi International Airport Asset Area 11 Aerocity New Delhi Delhi 110039. |
| Packer Details | Wedjat Health Solutions Pvt. Ltd. P.NO. 547 F1-F2 Pinnacle Apartment Arul Nagar East Tambaram Chennai Tamil Nadu 600059 Mail: info@cureka.com Telephone no: 9655928004 |
| Components | Oxygen Concentrator |
| Country of Origin | India |
| Expires on or After | 25-04-25 |
| SKU | HEA/RES/10210 |
